{"id":1674,"date":"2025-10-07T08:10:04","date_gmt":"2025-10-07T08:10:04","guid":{"rendered":"https:\/\/pro-diag.org\/?p=1674"},"modified":"2025-10-07T08:14:04","modified_gmt":"2025-10-07T08:14:04","slug":"complete-guide-to-flashing-the-dbscar-5-adapter-to-prodiag","status":"publish","type":"post","link":"https:\/\/pro-diag.org\/cs\/complete-guide-to-flashing-the-dbscar-5-adapter-to-prodiag\/","title":{"rendered":"KOMPLETN\u00cd N\u00c1VOD K FLASHOV\u00c1N\u00cd ADAPT\u00c9RU DBSCAR 5 PRO ProDiag"},"content":{"rendered":"

Na rozd\u00edl od DBScar 7 lze DBScar 5 obvykle flashovat p\u0159\u00edmo prost\u0159ednictv\u00edm mobiln\u00ed aplikace. U pokro\u010dil\u00fdch verz\u00ed firmwaru nebo u n\u011bkter\u00fdch oprav v\u0161ak m\u016f\u017ee b\u00fdt nutn\u00e9 fyzick\u00e9 p\u0159ipojen\u00ed k program\u00e1toru. Tento n\u00e1vod pokr\u00fdv\u00e1 cel\u00fd postup \u2013 od otev\u0159en\u00ed krytu a p\u0159ipojen\u00ed k program\u00e1toru a\u017e po fin\u00e1ln\u00ed flashov\u00e1n\u00ed a ov\u011b\u0159en\u00ed funk\u010dnosti.<\/p>

Pozn\u00e1mka: Flashovac\u00ed soubory pot\u0159ebn\u00e9 pro va\u0161e za\u0159\u00edzen\u00ed lze zakoupit zde: <\/strong>Spou\u0161t\u011bc\u00ed soubory ProDiag<\/strong><\/a><\/strong><\/p>

\"\"<\/figure>

Otev\u0159en\u00ed krytu<\/strong><\/p>

Kryt DBScar 5 je vyroben z plastu a je spojen mal\u00fdmi z\u00e1padkami. K jeho otev\u0159en\u00ed pou\u017eijte tenk\u00fd plastov\u00fd p\u00e1\u010dic\u00ed n\u00e1stroj nebo n\u00e1stroj na otev\u00edr\u00e1n\u00ed telefon\u016f. Nepou\u017e\u00edvejte \u0161pi\u010dat\u00fd \u0161roubov\u00e1k, proto\u017ee m\u016f\u017ee zanechat stopy nebo po\u0161kodit plast. Pokud m\u00e1 adapt\u00e9r gumov\u00fd ochrann\u00fd kryt, nejprve jej sundejte. Pot\u00e9 najd\u011bte spoje a z\u00e1padky uprost\u0159ed krytu a opatrn\u011b vlo\u017ete p\u00e1\u010dic\u00ed n\u00e1stroj mezi horn\u00ed a spodn\u00ed \u010d\u00e1st. Pomalu postupujte kolem cel\u00e9ho krytu, dokud se v\u0161echny z\u00e1padky neuvoln\u00ed. Po otev\u0159en\u00ed uvid\u00edte desku plo\u0161n\u00fdch spoj\u016f s mikro\u0159adi\u010dem a testovac\u00edmi body pro programov\u00e1n\u00ed.<\/p>

\"\"<\/figure>

P\u0159ipojen\u00ed k program\u00e1toru<\/strong><\/p>

Na desce PCB DBScar 5 jsou p\u0159ipojovac\u00ed body pro program\u00e1tory ST-LINK V2 nebo J-Link. Obvykle jsou ozna\u010deny nebo provedeny jako mal\u00e9 kulat\u00e9 pady. Mus\u00ed b\u00fdt p\u0159ipojeny \u010dty\u0159i kl\u00ed\u010dov\u00e9 piny: GND, 3.3V, SWDIO a SWCLK.<\/p>

P\u0159ipojte vodi\u010de program\u00e1toru pin-k-pinu:<\/p>

GND \u2192 GND<\/p>

3.3V \u2192 3.3V<\/p>

SWDIO \u2192 SWDIO<\/p>

SWCLK \u2192 SWCLK<\/p>

Pokud pou\u017e\u00edv\u00e1te p\u00e1je\u010dku, p\u0159ip\u00e1jejte k t\u011bmto pad\u016fm tenk\u00e9 vodi\u010de. Pokud ji nem\u00e1te, lze pou\u017e\u00edt mal\u00e9 krokosvorky nebo piny, ale zajist\u011bte stabiln\u00ed spojen\u00ed b\u011bhem flashov\u00e1n\u00ed. P\u0159ed p\u0159ipojen\u00edm pe\u010dliv\u011b zkontrolujte ve\u0161ker\u00e9 zapojen\u00ed \u2014 nespr\u00e1vn\u00e9 p\u0159ipojen\u00ed m\u016f\u017ee po\u0161kodit mikro\u0159adi\u010d.<\/p>

Flashov\u00e1n\u00ed firmwaru<\/strong><\/p>

Jakmile je adapt\u00e9r p\u0159ipojen k program\u00e1toru, zapojte ST-LINK V2 do USB portu po\u010d\u00edta\u010de a spus\u0165te STM32 ST-LINK Utility. Software by m\u011bl mikro\u0159adi\u010d okam\u017eit\u011b rozpoznat. V aplikaci vyberte \u201eProgram\u201c nebo \u201eLoad File\u201c a zvolte soubor firmwaru pro DBScar 5 (ujist\u011bte se, \u017ee jde o spr\u00e1vn\u00fd soubor pro tento model ve form\u00e1tu .bin). Klikn\u011bte na \u201eStart\u201c a po\u010dkejte na dokon\u010den\u00ed procesu. Neodpojujte kabely, neh\u00fdbejte vodi\u010di ani nevyp\u00ednejte po\u010d\u00edta\u010d. Flashov\u00e1n\u00ed obvykle trv\u00e1 m\u00e9n\u011b ne\u017e minutu a po dokon\u010den\u00ed se zobraz\u00ed zpr\u00e1va o \u00fasp\u011bchu.<\/p>

\"\"<\/figure>

Uzav\u0159en\u00ed krytu a ov\u011b\u0159en\u00ed<\/strong><\/p>

Odpojte vodi\u010de program\u00e1toru, v p\u0159\u00edpad\u011b pot\u0159eby o\u010dist\u011bte zbytky p\u00e1jky a opatrn\u011b vlo\u017ete PCB zp\u011bt do krytu. Zav\u0159ete kryt tak, aby v\u0161echny z\u00e1padky zaklaply na sv\u00e9 m\u00edsto.<\/p>

Nyn\u00ed zapojte DBScar 5 do OBD portu vozidla a spus\u0165te aplikaci ProDiag v telefonu. P\u0159ihlaste se, zapn\u011bte Bluetooth a p\u0159ipojte adapt\u00e9r. Pokud je vy\u017eadov\u00e1n k\u00f3d, obvykle je to 1234 nebo 0000. Jakmile aplikace adapt\u00e9r rozpozn\u00e1, spus\u0165te diagnostiku vozidla, abyste ov\u011b\u0159ili, \u017ee v\u0161e funguje spr\u00e1vn\u011b.<\/p>

\u0158e\u0161en\u00ed probl\u00e9m\u016f<\/strong><\/p>

  • Pokud program\u00e1tor nerozpozn\u00e1 mikro\u0159adi\u010d, zkontrolujte p\u0159ipojen\u00ed a nap\u00e1jen\u00ed.<\/li>\n\n
  • Pokud se flashov\u00e1n\u00ed zastav\u00ed uprost\u0159ed, zkuste to znovu od za\u010d\u00e1tku.<\/li>\n\n
  • Pokud adapt\u00e9r po flashov\u00e1n\u00ed nereaguje, nej\u010dast\u011bj\u0161\u00ed p\u0159\u00ed\u010dinou je nespr\u00e1vn\u00fd firmware. Znovu jej flashn\u011bte spr\u00e1vn\u00fdm souborem.<\/li>\n\n
  • Pokud se Bluetooth nep\u0159ipoj\u00ed, sma\u017ete star\u00e9 sp\u00e1rov\u00e1n\u00ed v nastaven\u00ed telefonu a sp\u00e1rujte znovu.<\/li><\/ul>

    Shrnut\u00ed:<\/strong> DBScar 5 se otev\u0159e pomoc\u00ed plastov\u00e9ho p\u00e1\u010dic\u00edho n\u00e1stroje, p\u0159ipoj\u00ed se k ST-LINK V2 p\u0159es rozhran\u00ed SWD, firmware se nahraje pomoc\u00ed STM32 ST-LINK Utility a pot\u00e9 se adapt\u00e9r znovu sestav\u00ed a pou\u017e\u00edv\u00e1 s ProDiag.<\/p>","protected":false},"excerpt":{"rendered":"

    Na rozd\u00edl od DBScar 7 lze DBScar 5 obvykle flashovat p\u0159\u00edmo prost\u0159ednictv\u00edm mobiln\u00ed aplikace. U pokro\u010dil\u00fdch verz\u00ed firmwaru nebo p\u0159i ur\u010dit\u00fdch oprav\u00e1ch v\u0161ak m\u016f\u017ee b\u00fdt nutn\u00e9 fyzick\u00e9 p\u0159ipojen\u00ed k program\u00e1toru. Tento pr\u016fvodce pokr\u00fdv\u00e1 cel\u00fd postup \u2013 od otev\u0159en\u00ed krytu a p\u0159ipojen\u00ed k program\u00e1toru a\u017e po z\u00e1v\u011bre\u010dn\u00e9 flashov\u00e1n\u00ed a ov\u011b\u0159en\u00ed funk\u010dnosti. Pozn\u00e1mka: Soubory pot\u0159ebn\u00e9 pro flashov\u00e1n\u00ed \u2026<\/p>","protected":false},"author":1,"featured_media":1676,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"COMPLETE GUIDE TO FLASHING THE DBSCAR 5 ADAPTER TO ProDiag","_seopress_titles_desc":"","_seopress_robots_index":"","_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"iawp_total_views":207,"footnotes":""},"categories":[27],"tags":[],"class_list":["post-1674","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-guides"],"taxonomy_info":{"category":[{"value":27,"label":"Prodiag guides"}]},"featured_image_src_large":["https:\/\/pro-diag.org\/wp-content\/uploads\/2025\/10\/image.png",624,390,false],"author_info":{"display_name":"prodiag","author_link":"https:\/\/pro-diag.org\/cs\/author\/prodiag\/"},"comment_info":0,"category_info":[{"term_id":27,"name":"Prodiag guides","slug":"guides","term_group":0,"term_taxonomy_id":27,"taxonomy":"category","description":"","parent":0,"count":13,"filter":"raw","cat_ID":27,"category_count":13,"category_description":"","cat_name":"Prodiag guides","category_nicename":"guides","category_parent":0}],"tag_info":false,"_links":{"self":[{"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/posts\/1674","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/comments?post=1674"}],"version-history":[{"count":1,"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/posts\/1674\/revisions"}],"predecessor-version":[{"id":1678,"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/posts\/1674\/revisions\/1678"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/media\/1676"}],"wp:attachment":[{"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/media?parent=1674"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/categories?post=1674"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/pro-diag.org\/cs\/wp-json\/wp\/v2\/tags?post=1674"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}