{"id":1695,"date":"2025-10-07T08:18:16","date_gmt":"2025-10-07T08:18:16","guid":{"rendered":"https:\/\/pro-diag.org\/?p=1695"},"modified":"2025-10-07T08:19:18","modified_gmt":"2025-10-07T08:19:18","slug":"complete-guide-to-flashing-the-thinkdiag-2-adapter-to-prodiag","status":"publish","type":"post","link":"https:\/\/pro-diag.org\/sk\/complete-guide-to-flashing-the-thinkdiag-2-adapter-to-prodiag\/","title":{"rendered":"Kompletn\u00fd n\u00e1vod na flashovanie adapt\u00e9ra Thinkdiag 2 na ProDiag"},"content":{"rendered":"

ThinkDiag 2 je pokro\u010dil\u00fd OBD adapt\u00e9r. Pre pokro\u010dil\u00e9 verzie firmv\u00e9ru alebo na obnovenie \u201ezaseknut\u00e9ho\u201c zariadenia je potrebn\u00e9 fyzick\u00e9 flashovanie pomocou program\u00e1tora (ST-LINK V2 alebo J-Link). Tento n\u00e1vod pokr\u00fdva cel\u00fd proces \u2013 od otvorenia krytu, pripojenia program\u00e1tora, flashovania firmv\u00e9ru a\u017e po overenie funk\u010dnosti zariadenia.<\/p>

Pozn\u00e1mka: S\u00fabory na flashovanie potrebn\u00e9 pre va\u0161e zariadenie je mo\u017en\u00e9 zak\u00fapi\u0165 tu: <\/strong>Sp\u00fa\u0161\u0165acie s\u00fabory ProDiag<\/strong><\/a><\/strong><\/p>

\"\"<\/figure>

1. Otvorenie krytu<\/strong><\/p>

Kryt zariadenia ThinkDiag 2 je plastov\u00fd, pri\u010dom horn\u00fa a spodn\u00fa \u010das\u0165 dr\u017eia pohromade z\u00e1padky.<\/p>

Kroky:<\/p>

  1. Ak je pr\u00edtomn\u00fd gumov\u00fd ochrann\u00fd kryt, odstr\u00e1\u0148te ho.<\/li>\n\n
  2. Pou\u017eite tenk\u00fd plastov\u00fd p\u00e1\u010didlov\u00fd n\u00e1stroj alebo n\u00e1stroj na otv\u00e1ranie telef\u00f3nov. Nepou\u017e\u00edvajte \u0161picat\u00e9 skrutkova\u010de, preto\u017ee m\u00f4\u017eu po\u0161kodi\u0165 plast alebo vn\u00fatorn\u00e9 komponenty.<\/li>\n\n
  3. N\u00e1jdite z\u00e1padky v strede krytu. Za\u010dnite na strane oproti konektoru OBD a opatrne postupujte okolo cel\u00e9ho krytu, k\u00fdm sa neuvo\u013enia v\u0161etky z\u00e1padky.<\/li>\n\n
  4. Po otvoren\u00ed bude vidite\u013en\u00e1 doska plo\u0161n\u00fdch spojov (PCB) s mikrokontrol\u00e9rom a programovac\u00edmi testovac\u00edmi bodmi.<\/li><\/ol>
    \"\"<\/figure>

    2. Lokaliz\u00e1cia a pripojenie programovac\u00edch pinov<\/strong><\/p>

    Na doske plo\u0161n\u00fdch spojov (PCB) zariadenia ThinkDiag 2 sa nach\u00e1dzaj\u00fa pady alebo mal\u00e9 konektory na pripojenie program\u00e1tora. K\u013e\u00fa\u010dov\u00e9 piny s\u00fa:<\/p>

    • GND \u2013 Zem<\/li>\n\n
    • 3.3V \u2013 Nap\u00e1janie<\/li>\n\n
    • SWDIO \u2013 D\u00e1tov\u00e1 linka<\/li>\n\n
    • SWCLK \u2013 Hodinov\u00e1 linka<\/li><\/ul>

      Pripojte ich priamo k program\u00e1toru ST-LINK V2 alebo J-Link.<\/p>

      • Ak pou\u017e\u00edvate sp\u00e1jkova\u010dku, prisp\u00e1jkujte tenk\u00e9 vodi\u010de k testovac\u00edm bodom.<\/li>\n\n
      • Alternat\u00edvne je mo\u017en\u00e9 pou\u017ei\u0165 mal\u00e9 krokosvorky alebo piny, av\u0161ak spojenia musia zosta\u0165 stabiln\u00e9.<\/li><\/ul>

        Dvakr\u00e1t skontrolujte rozlo\u017eenie pinov, aby ste predi\u0161li skratu alebo po\u0161kodeniu mikrokontrol\u00e9ra.<\/p>

        3. Flashovanie firmv\u00e9ru<\/strong><\/p>

        1. Pripojte program\u00e1tor a zapojte ST-LINK V2 do USB portu po\u010d\u00edta\u010da. Spustite STM32 ST-LINK Utility. Softv\u00e9r by mal rozpozna\u0165 mikrokontrol\u00e9r zariadenia ThinkDiag 2.<\/li>\n\n
        2. Vyberte mo\u017enos\u0165 \u201eProgram\u201c alebo \u201eLoad File\u201c a na\u010d\u00edtajte pr\u00edslu\u0161n\u00fd firmv\u00e9r pre ThinkDiag 2 (s\u00fabor .bin).<\/li>\n\n
        3. Kliknite na \u201eStart\u201c a po\u010dkajte, k\u00fdm sa proces dokon\u010d\u00ed.<\/li>\n\n
        4. Po\u010das flashovania neh\u00fdbte vodi\u010dmi, neodp\u00e1jajte po\u010d\u00edta\u010d ani neodstra\u0148ujte adapt\u00e9r.<\/li>\n\n
        5. Proces zvy\u010dajne trv\u00e1 menej ako jednu min\u00fatu.<\/li>\n\n
        6. Ke\u010f softv\u00e9r potvrd\u00ed \u00faspe\u0161n\u00fd z\u00e1pis, proces flashovania je dokon\u010den\u00fd.<\/li><\/ol>
          \"\"<\/figure>

          4. Op\u00e4tovn\u00e1 mont\u00e1\u017e a overenie<\/strong><\/p>

          1. Odpojte vodi\u010de program\u00e1tora a opatrne vlo\u017ete dosku plo\u0161n\u00fdch spojov (PCB) sp\u00e4\u0165 do krytu.<\/li>\n\n
          2. Zatvorte kryt, k\u00fdm v\u0161etky z\u00e1padky nezapadn\u00fa na svoje miesto.<\/li>\n\n
          3. Pripojte ThinkDiag 2 k OBD portu vozidla a spustite aplik\u00e1ciu ProDiag v telef\u00f3ne.<\/li>\n\n
          4. Prihl\u00e1ste sa, zapnite Bluetooth a pripojte adapt\u00e9r. Predvolen\u00fd k\u00f3d je zvy\u010dajne 1234 alebo 0000.<\/li>\n\n
          5. Spustite diagnostiku vozidla, aby ste overili spr\u00e1vnu funk\u010dnos\u0165.<\/li><\/ol>

            5. Rie\u0161enie probl\u00e9mov<\/strong><\/p>

            • Ak program\u00e1tor nerozpozn\u00e1 mikrokontrol\u00e9r, skontrolujte pripojenia a nap\u00e1janie.<\/li>\n\n
            • Ak sa flashovanie zastav\u00ed uprostred procesu, sk\u00faste to znova.<\/li>\n\n
            • Ak adapt\u00e9r po flashovan\u00ed nereaguje, mohol by\u0165 pou\u017eit\u00fd nespr\u00e1vny firmv\u00e9r; preflashujte ho spr\u00e1vnym s\u00faborom.<\/li>\n\n
            • Ak sa Bluetooth nepripoj\u00ed, odstr\u00e1\u0148te star\u00e9 sp\u00e1rovanie v telef\u00f3ne a znova sa pripojte.<\/li><\/ul>

              Z\u00e1ver<\/strong><\/p>

              Adapt\u00e9r ThinkDiag 2 sa otv\u00e1ra pomocou plastov\u00e9ho p\u00e1\u010didlov\u00e9ho n\u00e1stroja, prip\u00e1ja sa k program\u00e1toru ST-LINK V2 alebo J-Link cez rozhranie SWD, firmv\u00e9r sa nahr\u00e1va pomocou STM32 ST-LINK Utility a n\u00e1sledne sa adapt\u00e9r znovu zmontuje a pou\u017e\u00edva s aplik\u00e1ciou ProDiag. Spr\u00e1vne flashovanie zabezpe\u010duje maxim\u00e1lnu kompatibilitu, stabiln\u00fa prev\u00e1dzku a pr\u00edstup ku v\u0161etk\u00fdm funkci\u00e1m ProDiag.<\/p>","protected":false},"excerpt":{"rendered":"

              ThinkDiag 2 je pokro\u010dil\u00fd OBD adapt\u00e9r. Pre pokro\u010dil\u00e9 verzie firmv\u00e9ru alebo na obnovenie \u201ezablokovan\u00e9ho\u201c zariadenia je potrebn\u00e9 ho fyzicky flashova\u0165 pomocou program\u00e1tora (ST-LINK V2 alebo J-Link). Tento n\u00e1vod pokr\u00fdva cel\u00fd proces \u2013 od otvorenia krytu, pripojenia program\u00e1tora, flashovania firmv\u00e9ru a\u017e po overenie funk\u010dnosti zariadenia.\nPozn\u00e1mka: Flashovacie s\u00fabory potrebn\u00e9 pre va\u0161e zariadenie \u2026<\/p>","protected":false},"author":1,"featured_media":1697,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"COMPLETE GUIDE TO FLASHING THE THINKDIAG 2 ADAPTER TO ProDiag","_seopress_titles_desc":"","_seopress_robots_index":"","_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"iawp_total_views":1014,"footnotes":""},"categories":[27],"tags":[],"class_list":["post-1695","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-guides"],"taxonomy_info":{"category":[{"value":27,"label":"Prodiag guides"}]},"featured_image_src_large":["https:\/\/pro-diag.org\/wp-content\/uploads\/2025\/10\/image-7.jpg",624,416,false],"author_info":{"display_name":"prodiag","author_link":"https:\/\/pro-diag.org\/sk\/author\/prodiag\/"},"comment_info":0,"category_info":[{"term_id":27,"name":"Prodiag guides","slug":"guides","term_group":0,"term_taxonomy_id":27,"taxonomy":"category","description":"","parent":0,"count":13,"filter":"raw","cat_ID":27,"category_count":13,"category_description":"","cat_name":"Prodiag guides","category_nicename":"guides","category_parent":0}],"tag_info":false,"_links":{"self":[{"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/posts\/1695","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/comments?post=1695"}],"version-history":[{"count":1,"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/posts\/1695\/revisions"}],"predecessor-version":[{"id":1699,"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/posts\/1695\/revisions\/1699"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/media\/1697"}],"wp:attachment":[{"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/media?parent=1695"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/categories?post=1695"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/pro-diag.org\/sk\/wp-json\/wp\/v2\/tags?post=1695"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}